How to Restore NiCad Cordless Drill Batteries

As you use nickel-cadmium (NiCad) rechargeable Panasonic cordless drill batteries and continuously recharge them, they hold less and less of a full charge over time. Within the rechargeable batteries a dendrite crystal substance, also known as battery charge memory, builds up and decreases the charge capacity. Eventually, when the rechargeable battery no longer holds a charge, the dendrite crystals have built up. To repair NiCad rechargeable batteries, you need to remove the dendrite crystals using an electric current.

Locate the black and red clamps on the trickle charger.

Test the NiCad rechargeable battery to make sure it is fully discharged.

Locate the positive and negative ends of the NiCad rechargeable battery.

Protect your eyes, hands and skin before beginning the rechargeable battery “jump start” process. This is a dangerous and hazardous procedure.

Hold the black clamp on the negative end of the battery.

Tap the red clamp on the positive end of the Hitachi cordless drill battery one or two times. Sparks may crack from the end of the battery.

Immediately hold the red and black clamps on the battery for 1 to 3 seconds only.

Use the battery tester or multimeter to determine the battery charge.

Repeat the process until the battery is fully charged.

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s