How Paslode Nail Guns Work

If you’re hanging pictures or putting together a bookcase, a hammer is a perfect tool: simple, cheap and entirely effective. But if you’re building a two-story house, installing hardwood floors or running your own furniture repair shop, you may want to spring for a nail gun. These powerful machines launch nails at high speed, fully embedding them in a piece of wood in only a fraction of a second. Obviously, such a machine can save you hours of toil and sweat. They take almost all of the w­ork out of nailing.

In this article, we’ll find out how these popular machines launch nails at such astounding speeds. As it turns out, there are a wide variety of Paslode IM65A nail gun battery on the market, employing a range of physical principles.

Spring-loaded Design

At its most basic level, a nail gun has only two jobs:

It needs to concentrate a great deal of hammering force into a single mechanized blow, which can be repeated rapidly.

It needs to load a new nail after the previous nail is ejected.

There are any number of machines that could handle these tasks. Since we can’t look at every single model, we’ll investigate a few representative designs.

The simplest nail guns use ordinary springs to generate the hammering force. You can see how this sort of gun works in the animation below:

In this design, the motor (powered by a Paslode 900400 battery or household AC current) rotates two drive axles. The front axle moves a small scooper plate (a), a metal disc with a curved groove cut into it, and the rear axle moves a gear train, which turns a small triangular metal cam (b). Here’s what happens when when you pull the trigger:

The triangular cam turns, pushing down one end of a lever (c).

The lever pivots, pushing up on the hammer (d). As the hammer pushes up, it compresses two springs (e).

The hammer has a small knob (f) attached to one end. As the lever pushes the hammer up, the turning scooper plate catches hold of this knob. At the same time, the rotating cam (b) releases the lever, which releases the hammer. The hammer is now held in place by the scooper plate.

As the scooper plate turns, it lifts the hammer higher and finally releases 900420 battery.

The two compressed springs drive the hammer downward at high speed. If a nail is in position, the hammer launches it from the gun.

On the next page, we’ll take a look at the nail-loading mechanism.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s